|
The Sycamore CEM (Continuous Emissions Monitor)
is a flexible Hydrogen Sulfide Gas Monitoring System with full sampling
capability. The CEM is a sophisticated system is configurable as
a single, dual or three-point monitoring system and can be used
to monitor the inlet, intermediate stage and outlet of odor control
systems. By using advanced OdaLog Hydrogen
Sulfide Gas Logger technology, the Sycamore CEM provides continuous
4 to 20 milliAmp output with real-time updates every 10 minutes
for each point being monitored. The specially outfitted OdaLog(s)
designed specifically for this application accurately measure H2S
concentrations as low as 5 parts per billion (5 PPB). Each OdaLog
is coupled with its own compact, dedicated sampling system to deliver
the sample from a remote location to the instrument at the proper
flow rate. The sampling system removes moisture from the sample
stream and periodically purges any accumulated water. An optional sophisticated PID controller uses 4-20 MilliAmp output to provide feedback loop control of chemical additions.
Single Point - This system can be configured to measure from 5 ppb to 2 PPM, 0-20 PPM, 0-200 PPM, or 0-1000 PPM.
Two Point - Two OdaLogs are used within this system and each point can be configured to measure from 5 ppb to 2 PPM, 0-20 PPM, 0-200 PPM, or 0-1000 PPM.
Three Point - Three OdaLogs are used within this system and each point can be configured to measure from 5 ppb to 2 PPM, 0-20 PPM, 0-200 PPM, or 0-1000 PPM.
|
